1998 — 2003 of release

Repair and operation of the car

Lexus RX 300
+ Lexus RX-300 cars
+ Governing bodies and methods of operation
- Settings and routine maintenance of the car
   General information
   General information about settings and adjustments
   Schedule of routine maintenance
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure of their rating, rotation of wheels
   Replacement of motive oil and oil filter
   General checks of the brake system
   Check and replacement of the saloon filter of a heater and To/in
   Check of a state and replacement of hoses of a motive compartment, localization of leaks
   Check of a state and replacement of belts of the drive of auxiliary units
   Replacement of the filtering air cleaner element
   Check of a condition of system of production of the fulfilled gases
   Check and replacement of spark plugs
   Replacement of brake fluid, pumping of the brake system
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts and hinges of the driveshaft
   Check of operability of lighting fixtures, horn and fan of a heater
   Check of the EVAP system
   Check of a state, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery and care of it
   Replacement of the cooling liquid (CL)
   Check and adjustment of valvate gaps
   Check and adjustment of the course of pedals of the working and parking brake
   Check of boots of the parking brake
+ Engine
+ Cooling systems of the engine, heating, ventilation and air conditioning
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections

2598ff35 plan cul

Check of a state, adjustment and replacement of brushes of screen wipers


  1. On brushes of screen wipers the road film collects over time, reducing efficiency of their work therefore brushes should be washed out regularly in the soft cleaning solution.
  2. Assemblies of screen wipers with brushes should be examined regularly. If survey revealed existence of hardenings or cracks on rubber of brushes, replace them. If at survey nothing unusual is revealed, wet a windshield, include screen wipers, let's them work a little, and switch off them. Or strips on pure glass indicate an uneven trace from brushes on glass that brushes should be replaced.
  3. If brushes insufficiently well clear a windshield, then hit on glass of particles of wax can be the cause of it when passing by the car of an automatic sink. These particles can be removed at addition in liquid of windscreen washer of the detergent having property to dissolve wax.

Filling of the tank of a washer of glasses liquid with voskorastvoryayushchy properties can significantly improve action of screen wipers. Fat-dissolving cleaners are not able to purify glass completely.

  1. During operation of the mechanism of screen wipers there can be a weakening of fixing nuts therefore they should be checked and as necessary to improve every time when checking brushes (see more detailed information on operation of the mechanism of screen wipers in the Head Governing bodies and methods of operation).
  2. For adjustment of screen wipers expose them according to the sizes.
A — 43.5
B — 48.5
With — 15.5
D — 600
E — 43.1
F — 525
G — 46
A — 400 mm
B — 6.5 mm
With — 0 mm
D — the 130th hail.
  1. Moisten glass with water and put screen wipers in action. Check brushes of screen wipers for lack of jingle, if necessary repeat the procedure of adjustment.

(adsbygoogle121 = window.adsbygoogle121 || []).push({});