1998 — 2003 of release

Repair and operation of the car

Lexus RX 300
+ Lexus RX-300 cars
+ Governing bodies and methods of operation
- Settings and routine maintenance of the car
   General information
   General information about settings and adjustments
   Schedule of routine maintenance
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure of their rating, rotation of wheels
   Replacement of motive oil and oil filter
   General checks of the brake system
   Check and replacement of the saloon filter of a heater and To/in
   Check of a state and replacement of hoses of a motive compartment, localization of leaks
   Check of a state and replacement of belts of the drive of auxiliary units
   Replacement of the filtering air cleaner element
   Check of a condition of system of production of the fulfilled gases
   Check and replacement of spark plugs
   Replacement of brake fluid, pumping of the brake system
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts and hinges of the driveshaft
   Check of operability of lighting fixtures, horn and fan of a heater
   Check of the EVAP system
   Check of a state, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery and care of it
   Replacement of the cooling liquid (CL)
   Check and adjustment of valvate gaps
   Check and adjustment of the course of pedals of the working and parking brake
   Check of boots of the parking brake
+ Engine
+ Cooling systems of the engine, heating, ventilation and air conditioning
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections


General information

The components of a motive compartment which are subject to regular service

1 — the Cover of a jellied mouth of motive oil
2 — the Tank of brake fluid
3, 5 — the Assembly block of safety locks
4 — the Rechargeable battery

6 — the Probe of measurement of level of motive oil
7 — the Tank of liquid of windscreen washers
8 — the Broad tank of OZh
9 — the GUR liquid Tank

This chapter was formed with the purpose to help the owner of the car to support the vehicle in a condition of the maximum readiness for operation, receiving from it effective return with observance of requirements to profitability and safety.

At the beginning of the head the schedule of routine maintenance of the car is provided. Below the sections devoted to a detailed statement of an order of performance of each of procedures of service separately are offered attention of the reader. Material included descriptions of visual checks, adjustments, procedures of removal and installation of components, and also various useful tips and recommendations.

Serving the car according to the stipulated kilometrazhno-time schedule, and following the detailed recommendations provided below, the reader will receive the accurate action program which implementation will provide long duration and reliability of service of its vehicle. Remember that this program is made on a complex basis and implementation only of its separate points with neglect others will not result in desirable result.

Do not forget as well that at severe conditions of operation, such as, at primary operation of the car in a city cycle, frequent movements in the mountain area, towage of the trailer or the movement in the conditions of the increased dust content maintenance should be carried out more often.

In the course of service of the car the reader will soon be convinced that many procedures can, and have to be united in the general groups in view of similarity of the nature or proximity of an arrangement of knots. For example, if the car for any reason is lifted above the ground, it is necessary to take an opportunity and at the same time to check a condition of components of system of production of the fulfilled gases, a suspension bracket and steering. Also, having hired a dynamometer key, check effort of tightening of all available carving fixture. Making rotation of wheels, at the same time estimate a condition of brake mechanisms and wheel bearings.

The first step of service of the vehicle is always self-training of the performer. Attentively get acquainted with material of the present Chapter, then make the list of the components needing attention, prepare the necessary tool and outline the short plan of the forthcoming works. In case of emergence resistant to solution of problems ask for the help specialists of car service.

(adsbygoogle121 = window.adsbygoogle121 || []).push({});