LEXUS RX 300

1998 — 2003 of release

Repair and operation of the car


Lexus RX 300
+ Lexus RX-300 cars
+ Governing bodies and methods of operation
- Settings and routine maintenance of the car
   General information
   General information about settings and adjustments
   Schedule of routine maintenance
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure of their rating, rotation of wheels
   Replacement of motive oil and oil filter
   General checks of the brake system
   Check and replacement of the saloon filter of a heater and To/in
   Check of a state and replacement of hoses of a motive compartment, localization of leaks
   Check of a state and replacement of belts of the drive of auxiliary units
   Replacement of the filtering air cleaner element
   Check of a condition of system of production of the fulfilled gases
   Check and replacement of spark plugs
   Replacement of brake fluid, pumping of the brake system
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts and hinges of the driveshaft
   Check of operability of lighting fixtures, horn and fan of a heater
   Check of the EVAP system
   Check of a state, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery and care of it
   Replacement of the cooling liquid (CL)
   Check and adjustment of valvate gaps
   Check and adjustment of the course of pedals of the working and parking brake
   Check of boots of the parking brake
+ Engine
+ Cooling systems of the engine, heating, ventilation and air conditioning
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections

2598ff35

Check of a condition of system of production of the fulfilled gases

 PERFORMANCE ORDER

  1. Check should be made at the cold engine therefore it is better to be engaged in it before a trip, the first for the present day, or not earlier than in three hours after switching off of the engine. Check a condition of all system of release, beginning from the engine and finishing with a cut of an exhaust pipe. Ideally this inspection should be carried out at the lifted car when to it there is free access from below. The car and reliably establish to Poddomkratta it on support.
  2. Check pipes and their connections for existence of signs of leaks, strong corrosion and damages. Check a state and reliability of fastening of all collars and rubber suspensions of system.
  3. At the same time examine the car bottom on existence of holes, corrosion, the dispersed seams and other defects allowing penetration of the fulfilled gases into interior of the car. Close up all openings suitable sealant.
  4. The system of release, especially its support and suspensions, often are a source of a roar and other unpleasant sounds. Shake and pull pipes, mufflers and the catalytic converter (at the corresponding complete set). If these components adjoin to elements of a body or details of a suspension bracket, replace their fixture.
  5. Examine an electrical wiring a lambda probes, established on reception pipes and behind the back catalytic converter. If necessary replace wiring together with the sensor.
  6. Survey of an internal surface of an exhaust pipe allows to define the current working condition of the engine. The structure of deposits in a pipe speaks about quality of settings of the engine. If the pipe from within black and zakopchyonny, it can indicate checks of fuel system the need.


(adsbygoogle121 = window.adsbygoogle121 || []).push({});