LEXUS RX 300

1998 — 2003 of release

Repair and operation of the car



Lexus RX 300
+ Lexus RX-300 cars
+ Governing bodies and methods of operation
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating, ventilation and air conditioning
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   - External equipment and body elements
      Removal and installation of the top strut of a motive compartment
      Removal and installation of bumpers
      Removal and installation of a cowl, its lock and decorative front grille
      Removal, installation, dismantling and assembly of a forward door and its components
      Removal, installation, dismantling and assembly of a back door and its components
      Removal, dismantling, assembly and installation of a door of a back and its components
      Removal and installation of cleaners and fairing of a windshield
      Removal and installation of moldings
      Removal and installation of a spoiler
      Removal and installation of the top hatch
   + Equipment of salon
+ Onboard electric equipment
+ Schematic diagrams of electric connections


2598ff35 купить гос номер



Removal and installation of the top hatch

Components of the top hatch

1 — a hatch Frame
2 — the Basic arm
3 — Guides of cables
4 — the Driving mechanism
5 — the Stopper of a driving cable
6 — the Water-collecting trench
7 — the Directing plate
8 — the Arm

9 — the Arm of the forward saloon lamp
10 — the Panel of a vetrootboynik
11 — Glass
12 — the Central holding frame
13 — the guide Block
14 — the Driving cable
15 — the Shading screen


 PERFORMANCE ORDER

  1. Remove a covering of a ceiling of salon (see the Section Removal and installation of finishing of a ceiling).
  2. Remove basic a hatch arm.
  3. Give 4 nuts and remove hatch cover glass up.
  4. Separate the socket, wring out 4 clamps and disconnect from the case of 4 drain tubes.
  5. Turn out 12 bolts and remove 6 arms.
  6. Give 6 nuts and remove the hatch case from a body.
  7. If necessary dismantling and assembly of the hatch you make Components of the top hatch according to an illustration.
  8. After assembly and installation adjust the provision of a cover of the hatch, moving it at the released fixture. Tighten fixture with the required efforts.