LEXUS RX 300

1998 — 2003 of release

Repair and operation of the car



Lexus RX 300
+ Lexus RX-300 cars
+ Governing bodies and methods of operation
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating, ventilation and air conditioning
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   + External equipment and body elements
   - Equipment of salon
      Removal and installation of the dashboard and main ware box
      Removal of a carpet of a floor and ware box of the central console
      Removal and installation of finishing of a ceiling
      Removal, dismantling, assembly and installation of front seats
      Removal, dismantling, assembly and installation of back seats
      Removal and installation of seat belts and their emergency natyazhitel
+ Onboard electric equipment
+ Schematic diagrams of electric connections


2598ff35



Removal and installation of finishing of a ceiling

Components of installation of the panel of a ceiling (part 1)

1 — the Seat belt of a front seat
2 — the Side top finishing panel
3 — the Cover of a rack of a back suspension bracket
4 — the Back side panel of finishing
5 — Consolidation of a back door
6 — Hooks
7 — the Additional nest
8 — the Lower side panel
9 — Side finishing of a back seat
10 — the Overlay of a threshold of a back door
11 — the Lower section of finishing of the central rack of a body
12 — the Overlay of a threshold of a forward door
13 — the Side segment of the dashboard

14 — Finishing of a forward rack of a body
15 — Consolidation of a forward door
16 — the Top section of finishing of the central rack of a body
17 — the Side handle
18 — the Cover No. 1 of the luggage compartment
19 — the Back panel of finishing of the luggage compartment
20 — the Cover of a spare wheel
21 — the Ware box in the luggage compartment
22 — the Tray of the luggage compartment
23 — the Panel No. 3 of the luggage compartment
24 — the Panel No. 2 of the luggage compartment
25 — the Floor covering of the luggage compartment
26 — the Cover of the luggage compartment

Components of installation of the panel of a ceiling (part 2)

1 — the Back finishing panel of a ceiling
2 — the Lens
3 — the Lamp of the luggage compartment
4 — the ceiling Panel
5 — Handles

6 — the Saloon lamp
7 — the Sun-protection peak
8 — the Internal rear-view mirror
9 — Assembly of personal lamps
10 — Holders
11 — a mirror Cover


 PERFORMANCE ORDER

  1. Release a forward part of a floor covering of the luggage compartment from five clamps and remove it.
  2. Remove panels No. 2 and No. 3 of the luggage compartment, remove a tray and a cover of a spare wheel.
  3. Remove ware boxes and a cover of the luggage compartment.
  4. Remove back seats (see the Section Removal, dismantling, assembly and installation of back seats).
  5. Remove in the specified sequence side segments of the dashboard, an overlay of thresholds of forward doors, consolidations of forward doors, finishing of forward racks of a body, overlay of thresholds of back doors and consolidation of back doors.
  6. Remove the lower and top anchors of seat belts of a back seat then remove the lower and top sections of finishing of the central rack of a body.
  7. Remove the lens of the lamp of the luggage compartment, turn out 4 screws and remove the lamp.
  8. Remove the back finishing panel of a ceiling and the back panel of finishing of the luggage compartment.
  1. Turn out bolts, remove the lower hooks, take clamps and remove back side panels of finishing.
  1. Uncover racks of a back suspension bracket.
  2. Remove side finishing of a back seat.
  1. Uncouple a clip on a cover of an additional nest from an opening in the case of a nest and extend the case approximately on 10 mm.
  1. Wring out the screw-driver a clamp and remove an additional nest together with a cover, previously having separated the socket.
  1. Uncover No. 1 of the luggage compartment and the lower side panels.
  2. Remove the top anchors of seat belts of back seats, side handles and side top panels.
  3. Remove the lens, open glasses compartment, wring out 5 clamps, turn out 3 screws and remove assembly of personal lamps, previously having separated its socket.
  4. Uncover a mirror, on models with a mirror with automatic shading separate the mirror socket.
  5. Remove sun-protection peaks, their holders.
  6. Turn out 2 screws and remove 4 top handles.
  7. Remove the lens of the saloon lamp, turn out 4 screws and remove the lamp, previously having separated its socket.
  8. Wring out 2 clamps and remove finishing of a ceiling.
  9. Installation is made upside-down. Replace the deformed clamps.