LEXUS RX 300

1998 — 2003 of release

Repair and operation of the car



Lexus RX 300
+ Lexus RX-300 cars
+ Governing bodies and methods of operation
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating, ventilation and air conditioning
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   - External equipment and body elements
      Removal and installation of the top strut of a motive compartment
      Removal and installation of bumpers
      Removal and installation of a cowl, its lock and decorative front grille
      Removal, installation, dismantling and assembly of a forward door and its components
      Removal, installation, dismantling and assembly of a back door and its components
      Removal, dismantling, assembly and installation of a door of a back and its components
      Removal and installation of cleaners and fairing of a windshield
      Removal and installation of moldings
      Removal and installation of a spoiler
      Removal and installation of the top hatch
   + Equipment of salon
+ Onboard electric equipment
+ Schematic diagrams of electric connections


2598ff35



Removal and installation of a spoiler

Components of installation of a spoiler

1 — the Spoiler
2 — Side protection
3 — the Sealing plug


 PERFORMANCE ORDER

  1. Remove two sealing plugs and two bolts.
  2. Paste over a body around a spoiler with protective paper and heat a spoiler to temperature of 40 ÷ the 60th hail.
  1. By means of the string which is reeled up on two whetstones cut the gluing layer of fastening of a spoiler.

Do not damage a body.

  1. Disconnect a spoiler from clamps.
  2. Heat a body in the place of fastening of a spoiler to it to temperature of 40 ÷ the 60th hail. also clear a body of the glue remains.
  3. At reuse of a spoiler heat it to temperature of 20 ÷ the 30th hail. also clear of the glue remains.
  4. Establish new elements of side protection on a spoiler.
  5. Establish a spoiler, plugs and tighten fixing bolts.