LEXUS RX 300

1998 — 2003 of release

Repair and operation of the car



Lexus RX 300
+ Lexus RX-300 cars
+ Governing bodies and methods of operation
+ Settings and routine maintenance of the car
+ Engine
- Cooling systems of the engine, heating, ventilation and air conditioning
   + Engine cooling system
   - Systems of heating, ventilation and air conditioning
      General information
      Replacement, dismantling and assembly of the K/V block
      Removal, dismantling, assembly and installation of the block of the fan of a heater
      Check and replacement of the compressor and K/V magnetic coupling
      Removal and installation of the K/V condenser
      Checks of components of systems of heating and To/in
      Removal and installation of the control unit
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections


2598ff35

Removal and installation of the control unit

Components of installation of the control panel of a heater and To/in

1 — the Top section of the central console;
2 — the Multipurpose display;
3 — the Audio system;
4 — Switches

5 — the Electronic control unit the dashboard
6 — the Lower section of the dashboard
7 — the Control unit of a heater and To/in
8 — Plastina


 PERFORMANCE ORDER

  1. Remove the lower and top sections of the central console (see the Body) then separate the panel electrical wiring socket.
  2. Turn out 3 screws and remove the multipurpose display.
  3. Turn out 4 screws and remove many audio system.
  4. Turn out 6 screws and remove the block electronic controls of the dashboard.
  5. Turn out 15 screws and remove the control unit of a heater and К/В.
  6. Remove switches and a payment.
  7. Installation are made as it should be, the return to an order of dismantle of components.