LEXUS RX 300

1998 — 2003 of release

Repair and operation of the car


Lexus RX 300
+ Lexus RX-300 cars
+ Governing bodies and methods of operation
+ Settings and routine maintenance of the car
+ Engine
- Cooling systems of the engine, heating, ventilation and air conditioning
   + Engine cooling system
   - Systems of heating, ventilation and air conditioning
      General information
      Replacement, dismantling and assembly of the K/V block
      Removal, dismantling, assembly and installation of the block of the fan of a heater
      Check and replacement of the compressor and K/V magnetic coupling
      Removal and installation of the K/V condenser
      Checks of components of systems of heating and To/in
      Removal and installation of the control unit
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections

2598ff35

Removal, dismantling, assembly and installation of the block of the fan of a heater

Components of installation of the block of the fan of a heater

1 — Assembly of a CD changer
2 — the Right side panel of a fairing
3 — the heater fan Block
4 — the Air duct from the passenger party

5 — an electrical wiring Plait
6 — the Lower section No. 2 of the dashboard
7 — the Overlay of a threshold of the right forward door
8 — the Lower cover No. 2 of the dashboard

Components of assembly of the block of the fan of a heater

1 — the heater fan block Case
2 — the Saloon filter
3 — the Case of the saloon filter

4 — Э / the motor of supply of external air
5 — Э / the heater fan motor
6 — a filter Cover


 PERFORMANCE ORDER

  1. Remove the following parts:
    • Right side panel of a fairing;
    • Overlay of a threshold of the right forward door;
    • Lower dashboard cover No. 2;
    • Lower dashboard section No. 2;
    • Assembly of a CD changer (at the corresponding complete set);
    • Assembly of a forward safety cushion of the forward passenger (see the Head Onboard electric equipment);
  2. Turn out three screws and remove an air duct from the forward passenger.
  3. Separate sockets, weaken a collar of fastening of a plait of an electrical wiring.
  4. Turn out two bolts, two nuts, the screw and remove the heater fan block.
  5. Remove the saloon filter of a heater (see the Section Check and replacement of the saloon filter of a heater and To/in).
  6. Turn out three screws and remove э / the motor of the fan of a heater and э / the motor of supply of external air.
  7. Check serviceability of functioning э / the motor and the sensor of supply of external air.
  8. Assembly and installation are made as it should be, the return to an order of dismantle of components.