LEXUS RX 300

1998 — 2003 of release

Repair and operation of the car



Lexus RX 300
+ Lexus RX-300 cars
+ Governing bodies and methods of operation
+ Settings and routine maintenance of the car
+ Engine
- Cooling systems of the engine, heating, ventilation and air conditioning
   + Engine cooling system
   - Systems of heating, ventilation and air conditioning
      General information
      Replacement, dismantling and assembly of the K/V block
      Removal, dismantling, assembly and installation of the block of the fan of a heater
      Check and replacement of the compressor and K/V magnetic coupling
      Removal and installation of the K/V condenser
      Checks of components of systems of heating and To/in
      Removal and installation of the control unit
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections


2598ff35

Removal and installation of the K/V condenser

Components of installation of the K/V condenser

1 — the Condenser
2 — the Sealing ring
3 — the Digit hose

4 — the Liquid tube
5 — the Top casing of a radiator


 PERFORMANCE ORDER

  1. Discharge the К/В system.
  2. Unfasten 7 clamps and remove the top casing of a radiator.
  3. Remove a front bumper (see the Head Kuzov).
  4. Turn out two bolts and separate a digit hose and a liquid tube then as soon as possible to a zakuporta open branch pipes.
  5. Disconnect a clip of a liquid tube, turn out two bolts and pull out the condenser.
  6. Installation are made as it should be, the return to an order of dismantle of components. Use new sealing rings of a digit hose and a liquid tube. If the new condenser is installed, fill it with refrigerator oil according to requirements of Specifications of the Head of the Cooling system of the engine, heating, ventilation and air conditioning.