Lexus RX 300
+ Lexus RX-300 cars
+ Governing bodies and methods of operation
+ Settings and routine maintenance of the car
- Engine
General information and preparatory operations
Check of compression pressure
Check of the engine by means of the vacuum gage
Reduction of the piston of the first cylinder in the provision of the top dead point (TDP)
Check of a corner of an advancing of ignition
Removal, check and installation of a belt of the GRM drive of its natyazhitel, pulley and cogwheel of a bent shaft, cogwheels of camshafts and intermediate rollers
Removal, dismantling, check, assembly and installation of a head of cylinders and its components
Removal and installation of the engine, check of support
Block of cylinders
Check of D/V of pressure of motive oil
Removal, dismantling, check, assembly and installation of the oil pump and pallet of a case
+ Cooling systems of the engine, heating, ventilation and air conditioning
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections
|
Check of D/V of pressure of motive oil
Location of D/V of motive oil
|
|
- Turn out D/V and install the manometer on its place.
- Warm up the engine up to the normal working temperature.
- Consider indications of the manometer and compare to requirements of Specifications of the Head Dvigatel.
- Remove the manometer and screw into place D/V of pressure of motive oil, previously having greased its carving with the fixing sealant, for example, of Loctite 242.
- Tighten D/V with effort of 13 Nanometers.
- Start the engine and make sure of lack of leak of oil.
|
|
|
(adsbygoogle121 = window.adsbygoogle121 || []).push({});
|
