LEXUS RX 300

1998 — 2003 of release

Repair and operation of the car



Lexus RX 300
+ Lexus RX-300 cars
+ Governing bodies and methods of operation
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating, ventilation and air conditioning
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
- Brake system
   General information and security measures
   Removal, installation and check of pedals of the brake system
   Check of the brake system via the socket of the module of management
   Removal and installation of the tank and main brake cylinder (MBC)
   Removal, check and installation of the amplifier of brakes
   Replacement of brake shoes
   Removal, dismantling, check, assembly and installation of supports of brake mechanisms
   Dismantling, check and assembly of the parking brake
   Valve check of distribution of brake effort
   Removal and installation of the activator of brakes
   Removal and installation of wheel sensors
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections


2598ff35



Removal and installation of wheel sensors

Forward sensor of speed

Back sensor of speed

Forward sensor of speed

 PERFORMANCE ORDER

  1. Remove a forward wheel and a loker of his arch.
  2. Separate the speed sensor socket.
  3. Turn out a bolt and remove the holder of a flexible hose and electrical wiring of the sensor of speed from a suspension bracket rack.
  4. Remove a rubber clip from a suspension bracket rack, turn out a bolt and remove from a car body the holder of an electrical wiring of the sensor of speed.
  5. Screw a bolt and remove the speed sensor from a rotary fist.

Forward sensor of speed

 PERFORMANCE ORDER

  1. Remove a back seat, a protective plate and side finishing of a seat.
  2. Separate the socket of an electrical wiring of the sensor of speed and extend it it together with consolidation.
  3. Turn out two coupling bolts of fastening of an electrical wiring of the sensor of speed to a body and a rack of a suspension bracket.
  4. Turn out a bolt and remove the sensor.