LEXUS RX 300

1998 — 2003 of release

Repair and operation of the car



Lexus RX 300
+ Lexus RX-300 cars
+ Governing bodies and methods of operation
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating, ventilation and air conditioning
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   + External equipment and body elements
   - Equipment of salon
      Removal and installation of the dashboard and main ware box
      Removal of a carpet of a floor and ware box of the central console
      Removal and installation of finishing of a ceiling
      Removal, dismantling, assembly and installation of front seats
      Removal, dismantling, assembly and installation of back seats
      Removal and installation of seat belts and their emergency natyazhitel
+ Onboard electric equipment
+ Schematic diagrams of electric connections


2598ff35

Removal and installation of seat belts and their emergency natyazhitel

At separation of SRS sockets at the ignition key installed in the provision of "ON" or "ACC" in memory of the control unit the malfunction code is brought.

Components of installation of forward seat belts

1 — Laying No. 1 of the top section of finishing of the central rack of a body
2 — the Top section of finishing of the central rack of a body
3 — the Cover of the top anchor of a belt
4 — the Seat belt

5 — the Cover of the lower anchor of a belt
6 — the Lower section of finishing of the central rack of a body
7 — the belt Lock

Components of installation of back seat belts

1 — the Side belt
2 — the Central belt
3 — the Cover of the central belt
4 — the Side top finishing panel
5 — the Cover of a rack of a back suspension bracket
6 — the Back side panel of finishing
7 — the Lower side panel
8 — the Cover No. 1 of the luggage compartment

9 — the Back panel of finishing of the luggage compartment
10 — the Right back seat
11 — Hooks
12 — Side finishing of a back seat
13 — the belt Lock
14 — the Protection cover of the mechanism of adjustment of an inclination of a back
15 — Assembly of a pillow of a seat
16 — the Left back seat


 PERFORMANCE ORDER

  1. Remove overlays of thresholds and consolidation of forward and back doors.
  2. Remove both sections of finishing of the central rack of a body.
  3. Uncover the lower anchor of a forward belt then turn out a bolt and remove an anchor.
  4. Uncover the top anchor of a forward belt then turn out a bolt and remove an anchor.
  5. Separate the socket of a reducer of an emergency natyazhitel.
  1. Wring out the flat screw-driver the button of blocking of the socket of a natyazhitel and separate the socket.
  1. Turn out 2 bolts and remove the belt lock.
  2. The procedure of removal of back seat belts is provided in the Section Removal, dismantling, assembly and installation of back seats.
  3. Check seat belts for existence of damages and if necessary replace them.
  4. Installation is made upside-down.

Use new components of the SRS system.



(adsbygoogle121 = window.adsbygoogle121 || []).push({});