LEXUS RX 300

1998 — 2003 of release

Repair and operation of the car



Lexus RX 300
+ Lexus RX-300 cars
+ Governing bodies and methods of operation
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating, ventilation and air conditioning
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
- Suspension bracket and steering
   General information
   - Forward suspension bracket
      Removal, dismantling, assembly and installation of a nave and rotary fist
      Removal, dismantling assembly and installation of a rack of a suspension bracket
      Removal and installation of the lower lever of a suspension bracket
      Check and replacement of a spherical support of a suspension bracket
      Removal, installation and check of the stabilizer of a suspension bracket
   + Back suspension bracket
   + Steering
   + Suspension bracket geometry
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections


2598ff35

Check and replacement of a spherical support of a suspension bracket

 PERFORMANCE ORDER

  1. The spherical support is established between the lower lever of a suspension bracket and a rotary fist (see illustrations Components of installation and assembly of a nave and a rotary fist and Components of installation of the lower lever of a suspension bracket).
  2. The description of removal and installation of a spherical support is provided in the Section Removal, dismantling, assembly and installation of a nave and a rotary fist.
  3. Remove a spherical support and establish it in a vice.
  1. Shake a support tip back and forth about five times.
  1. Continuously tightening a dynamometer key a support nut with a speed of 1 a turn for 2 ÷ 4 with, consider indications of a key on the fifth turn and compare them to requirements of Specifications of the Head Podvesk and steering. If necessary replace a spherical support.


(adsbygoogle121 = window.adsbygoogle121 || []).push({});