Beating of the driveshaft, mm |
no more than 0.8 |
Beating of intermediate section of the driveshaft, mm |
no more than 0.8 |
Beating of flanges of intermediate section of the driveshaft |
no more than 0.1 |
Free wheeling of a power shaft in the axial direction, mm |
2 ÷ 3 |
Type and amount (g) of lubricant for stuffing of covers of CV JOINTS of power shafts |
|
Yellow, 115 ÷ 135 |
|
Gray, 95 ÷ 115 |
Type and amount (g) of lubricant for stuffing of covers of hinges of back power shafts |
|
Gray, 107 ÷ 117 |
|
Yellow, 180 ÷ 190 |
Standard length of power shafts, mm |
|
563.2 ± 2.0 |
|
914.8 ± 2.0 |
Standard length of back power shafts, mm |
607.7 ÷ 5.0 |
Gap in the lock of a collar of a protective cover of the external CV JOINT of a power shaft, mm |
1.2 ÷ 4.0 |
Depth of a press fitting of a forward epiploon of back differential, mm |
2.0 |
Depth of a press fitting of forward back differential of side epiploons, mm |
0 |
Beating of a connecting flange of back differential, mm |
no more than 0.1 |
Axial beating of the conducted gear wheel of back differential, mm |
no more than 0.07 |
Axial side play of the conducted gear wheel of back differential, mm |
0.13 ÷ 0.18 |
Axial side play of a side gear wheel of back differential, mm |
0.05 ÷ 0.20 |
Pretightness of the bearing of the leading gear wheel of back differential, Nanometer |
|
1.1 ÷ 1.7 |
|
0.6 ÷ 0.9 |
Full preloading of back differential, Nanometer |
0.3 ÷ 0.5 + bearing pretightness ведущёй gear wheels |
Thickness of persistent washers of side gear wheels of back differential, mm ± 0.02 mm |
0.95 ÷ 1.40 with a step 0.05 |
Thickness of persistent washers of the conducted gear wheel of differential, mm ± 0.01 mm |
0.22 ÷ 3.21 with a step 0.03 |
Thickness of washers for adjustment of a gap between the conducted and conducting gear wheels of back differential, mm ± 0.01 mm |
2.27 ÷ 2.69 with a step 0.03 |
Wheel nuts |
103 |
Stupichny nuts |
|
294 |
|
216 |
Bolt of fastening of sensors of speed of ABS |
|
8 |
|
20 |
Bolts of fastening of cardan hinges to back differential and AT |
74 |
Connecting bolts of back and central sections of the driveshaft |
27 |
Bolts of fastening of support of the driveshaft |
37 |
Nuts of fastening of flanges of the driveshaft |
1st approach
|
181 |
2nd approach
|
69 |
Drain and jellied traffic jams of back differential |
49 |
Nut of fastening of a connecting flange of back differential |
108 ÷ 235 |
Fixture of the central and back sections of an exhaust pipe |
43 |
Bolts of fastening of a damper of back differential |
95 |
Bolts of fastening of a cross beam of a back suspension bracket to a stretcher |
137 |
Bolts of fastening of back differential to a cross beam of a back suspension bracket |
103 |
Fixture of a back stretcher to a body |
|
83 |
|
181 |
Bolts of fastening of the case of the internal hinge of a back power shaft to differential |
56 ÷ 69 |
Bolts of fastening of lock plates to a differential box |
97 |
Bolts of fastening of covers of bearings to a casing of fastening of differential |
79 |
Bolts of fastening of maslootrazhatel on a cover of a casing of fastening of back differential |
7.4 |
Stopper of a sapun of back differential |
21 |
Bolts of fastening of a casing of fastening of back differential |
47 |