1998 — 2003 of release

Repair and operation of the car

Lexus RX 300
+ Lexus RX-300 cars
+ Governing bodies and methods of operation
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating, ventilation and air conditioning
- Power supply system and production of the fulfilled gases
   - Power supply system
      General information and security measures
      Dropping pressure in fuel system
      Principle of functioning of a control system of fuel injection
      Checks of system of injection
      Removal and installation of the fuel pump, sensor of a reserve of fuel and regulator of pressure of fuel
      Removal and installation of fuel distributive highways and injectors
      Removal and installation of the fuel tank and fuel lines
      Removal and installation of the air cleaner
      Removal, installation and adjustment of the case of a throttle and TPS sensor
      Removal and installation of components of the ACIS system
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections


Removal and installation of the air cleaner


  1. Separate the MAF sensor electrical wiring socket, turn out two screws and remove the MAF sensor together with laying from an air cleaner cover.
  1. Disconnect EVAP hose from EVAP tube, and also PCV hose from a cover of the left number of cylinders.
  1. Wring out two clamps of a cover of the air cleaner and remove it from the air cleaner case.
  1. Wring out two clamps and disconnect an air cleaner hose from the throttle case.
  2. Release a torso of the drive of a butterfly valve from a clip.
  3. Uncover the air cleaner together with a hose.
  4. Pull out the filtering element.
  5. Turn out three bolts and remove the air cleaner case.
  6. Wipe the air cleaner case pure rags.
  7. Install the new filtering element in the case, close a cover and fix it by clamps.
  8. Join all diconnected connections.

(adsbygoogle121 = window.adsbygoogle121 || []).push({});