1998 — 2003 of release

Repair and operation of the car

Lexus RX 300
+ Lexus RX-300 cars
+ Governing bodies and methods of operation
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating, ventilation and air conditioning
- Power supply system and production of the fulfilled gases
   - Power supply system
      General information and security measures
      Dropping pressure in fuel system
      Principle of functioning of a control system of fuel injection
      Checks of system of injection
      Removal and installation of the fuel pump, sensor of a reserve of fuel and regulator of pressure of fuel
      Removal and installation of fuel distributive highways and injectors
      Removal and installation of the fuel tank and fuel lines
      Removal and installation of the air cleaner
      Removal, installation and adjustment of the case of a throttle and TPS sensor
      Removal and installation of components of the ACIS system
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections


Removal and installation of components of the ACIS system

ACIS system components

1 — the ACIS Valve
2 — the Vacuum hose of the ACIS activator
3 — Laying

4 — a weight Cable
5 — the grounding Tire


  1. Disconnect a vacuum hose from the activator and separate No. 1 DLC socket.
  2. Give 4 nuts and remove No. 1 DLC socket from its arm. Disconnect a cable of weight and the tire of grounding from the ACIS valve.
  3. Hook the ACIS valve the screw-driver and remove it from the air distributor together with laying.
  1. At installation oil rubber parts motive and apply pro-masonry material (No. 08826-0008 according to the Toyota/Lexus catalog) on the specified sites of the valve. Use new laying. Tighten nuts with effort of 14.5 Nanometers.

(adsbygoogle121 = window.adsbygoogle121 || []).push({});