1998 — 2003 of release

Repair and operation of the car

Lexus RX 300
+ Lexus RX-300 cars
+ Governing bodies and methods of operation
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating, ventilation and air conditioning
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   General information
   Diagnostics of malfunctions of onboard electric equipment - the general information
   Safety locks - the general information
   The relay - the general information and check of serviceability of functioning
   Screen wipers and windscreen washers
   Replacement of glow lamps
   Removal and installation of a casing of a steering column and understeering switches
   Check of serviceability of functioning of some auxiliary systems
   Removal and installation of the antenna
   Removal and installation of a combination of devices
   Adjustment of an inclination of headlights
   Removal and installation of components of the SRS system
   Removal and installation of components of window regulators and screen wipers
+ Schematic diagrams of electric connections


Removal and installation of the antenna

The antenna is installed in a back part of the car, on the left board.


  1. Remove internal finishing of a side back window.
  2. Turn out two nuts of fastening of assembly of the antenna.

Antenna fixture

1 — the Cable
2 — the antenna Case
  1. Turn out the top nut and remove an antenna fringing from a body.
  2. Disconnect a cable and an electrical wiring from the antenna.
  3. Installation is made upside-down.

(adsbygoogle121 = window.adsbygoogle121 || []).push({});