LEXUS RX 300

1998 — 2003 of release

Repair and operation of the car


Lexus RX 300
+ Lexus RX-300 cars
+ Governing bodies and methods of operation
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating, ventilation and air conditioning
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   General information
   Diagnostics of malfunctions of onboard electric equipment - the general information
   Safety locks - the general information
   The relay - the general information and check of serviceability of functioning
   Screen wipers and windscreen washers
   Replacement of glow lamps
   Removal and installation of a casing of a steering column and understeering switches
   Check of serviceability of functioning of some auxiliary systems
   Removal and installation of the antenna
   Removal and installation of a combination of devices
   Adjustment of an inclination of headlights
   Removal and installation of components of the SRS system
   Removal and installation of components of window regulators and screen wipers
+ Schematic diagrams of electric connections

2598ff35 Experience the thrill of discovering new content with 123movies.

Adjustment of an inclination of headlights

Adjustment of an inclination of a headlight with a halogen lamp

Adjustment of an inclination of a headlight with a digit lamp

Adjustment of an inclination of a fog light

 PERFORMANCE ORDER

  1. Fulfill the following requirements:
    • Make sure that the body around headlights is not deformed;
    • Park the car on a plain horizontal surface;
    • The driver's place has to be taken, and the fuel tank – is completely filled;
    • Shake the car several times;
  2. Make sure of correctness of a rating of tires.
  3. Arrange the car at right angle to the vertical stand so that the distance from headlights to the stand made 3 m.
  4. Apply the adjusting sizes on the stand and if necessary adjust headlights by means of adjusting bolts.

The sizes for adjustment of headlights

H (3 m) — Height to the center of a light bunch of headlights of passing beam
The V RH — the Axis of a light bunch of a right headlight of passing beam
The V LH — the Axis of a light bunch of a left headlight of passing beam
V \Longitudinal axis of the car
W (1349 mm) — Distance between centers light bunches of headlights of passing beam

At adjustment of headlights with digit lamps at first turn a bolt 2, and then a bolt 1 on the same quantity of turns and in the same direction.



(adsbygoogle121 = window.adsbygoogle121 || []).push({});