LEXUS RX 300

1998 — 2003 of release

Repair and operation of the car



Lexus RX 300
+ Lexus RX-300 cars
- Governing bodies and methods of operation
   + Access, protection
   + Elements of security systems
   + Car equipment, arrangement of devices and governing bodies
   - Devices of ensuring comfort
      System of automatic heating and onditsionirovaniye of air
      Tempostat
      Audio system
   + Methods of operation and auxiliary systems
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating, ventilation and air conditioning
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schematic diagrams of electric connections


2598ff35



Audio system

General information

Regularly on the considered models the audio system without a possibility of playing of compact disks (CD) therefore it is considered below is installed. For receiving a possibility of playing of CD it is necessary to establish a CD changer. For functioning of the audio system the ignition key has to be in the provision of "ACC" or "ON". Purpose of many switches and regulators of the audio system often clear from their name therefore their description is not provided. Purpose of action buttons can change according to the current signatures over them. At turning on of the audio system of control, made before its switching off, except switching off of a sound, remain. The antenna automatically moves forward/cleans up at inclusion/switching off of ignition and the audio system.

Governing bodies and control of the audio system

1 — Action buttons
1-6 — Buttons of the choice of radio station
SCAN — Search of radio station
P-SCAN — Search in the radio stations brought in memory
2 — display Indicators
[1] — Change of the party of the cartridge
[2] — DOLBY NR mode
[3] — Rewind back/forward
RPT — Automatic repetition
SKIP — the Automatic admission
blank spaces on a film
SCAN — Is chosen function
scannings

[4] — The choice of a disk (in the CD mode)
RND — the Mode of the disorder playing
D-SCAN — Is chosen the mode of scanning of a disk (in the CD mode)
3 — the Switch of system and the regulator of loudness
4 — the Button of a stop of reproduction and switching off of the cartridge
5 — In the mode of radio: Control of frequency
In the mode of the cartridge or CD: Direct access to the program
6 — Buttons of the choice of the mode: radio (AM, FM), cartridge, CD
7 — the Blind of office for the cartridge
8 — Buttons of brightness control of the display
9 — the Button of switching off of a sound
10 — the sound Regulator

Sound regulator

By each pressing the regulator there is a change of parameter. For adjustment of the chosen parameter turn the regulator. The list of adjustable parameters according to their designations on the display is given below:

BAS — Adjustment of range of low frequencies;

MId — Adjustment of range of average frequencies;

TRE — Adjustment of range of high frequencies;

FAd — Adjustment of balance of loudness of forward/back loudspeakers;

BAL — Adjustment of balance of loudness of the left/right loudspeakers.

Mode of radio

Entering of radio station in memory

Be adjusted on the required frequency, press and hold one of buttons of memory of stations (with 1 on 6) before emergence of a sound signal. The adjusted frequency will be brought in memory at the corresponding number. It is possible "to attach" one frequency of range of AM and two frequencies of range of FM to each number. For change of the frequency corresponding to any number repeat the procedure described above.

At a detachment of wires from the rechargeable battery and at burn-out of a safety lock of the audio system memory of radio stations is erased.

Choice of radio station

It is possible to choose radio station as one of the next ways:

  • Quickly press the button with number corresponding to number of radio station in memory;
  • Quickly press settings of frequency the button – the next radio station brought in memory will be chosen;
  • Press and hold the button of control of frequency – scanning of frequencies before detection of the nearest radio station will be made;
  • Press the action button with the signature of "SCAN" – scanning of frequencies before detection of the nearest radio station then search for several seconds will stop will be made, and then will continue again. For the choice of the found station press the mentioned button once again;
  • Press the action button with the signature of "P-SCAN" – the radio station brought in memory then search for several seconds will stop will be chosen following (on increase) and then will proceed again. For the choice of the found station press the mentioned button once again;

Cartridge mode

Playing of the cartridge begins automatically at its installation in the audio system. If the cartridge is already installed, press the TAPE button for its reproduction. At the end of record on one party of the cartridge (irrespective of whether rewind or reproduction was included), the direction of scrolling of a film changes automatically (other party will play). At extraction of the cartridge the mode set before its reproduction is chosen; if before reproduction of the cartridge the audio system was switched off, then after extraction of the cartridge the system will be switched off.

By means of the action button with the signature of "DOLBY NR" it is possible to choose the noise suppression method corresponding to the method used at record of this cartridge (by its repeated pressing), or to switch off noise reduction (by deduction of the button).

Automatic control of reproduction

 PERFORMANCE ORDER

  1. For correct work of automatic control of reproduction between fragments of record there has to be a pause not less than 3 seconds.
  2. For repetition of the current fragment of record, during its reproduction press the action button with the signature of "RPT". After the termination of a fragment the cartridge will be rewound for the beginning of this fragment. For cancellation of the mode of repetition press the mentioned button once again.
  3. For the admission of a blank space lasting more than 15 seconds, for example, at the end of the cartridge, press the action button with the signature of "SKIP". After the termination of a blank space reproduction of the following fragment of record behind it will begin. For cancellation of the admission press the mentioned button once again.
  4. For search of a fragment of record press the action button with the signature of "SCAN". The cartridge will be rewound for the beginning of the following fragment of record then there will be vosproizvedyono 12 seconds of its beginning, and then there will be a rewind by the beginning of the following fragment. For the choice of the current fragment press the mentioned button once again.
  5. For the admission of several fragments (to nine) after / to the current fragment press records respectively right/left button of direct access to the program. On the display the inscription according to "FF" or "REW" and number of the passed fragments will appear. For increase in number of the passed fragments press the mentioned button once again. If during the admission reach the end of the cartridge, there is an automatic change of the party and reproduction of this party of the cartridge joins; if the beginning of the cartridge is reached, rewind is disconnected and joins its reproduction back.

At the admission also the current fragment in the opposite direction is considered, i.e. at the REW 1 installation the cartridge will be rewound for the beginning of the current fragment.